Updated Nov 12, 2026· 12 min read

Key takeaways

  • Eight cut-resistant gloves for filleting and cleaning fish, with ANSI and EN cut levels explained, plus fit, wet grip and care.

For most home fish cleaning, a snug HPPE-style fabric glove with a textured or rubberized palm is the right choice, and a rating of ANSI A4 to A6 gives a sensible margin on the hand that holds the fish. Go to A7-A9 or a stainless steel mesh glove if you break down a lot of fish, work with a very sharp blade, or simply want the most protection. Whatever you pick, buy it for fit and wet grip first and the cut number second. A glove that slides around on a slimy fillet is a hazard, not a safeguard.

One thing to settle early: cut-resistant does not mean cut-proof, and it says almost nothing about punctures. A fillet knife tip, a pin bone, a dorsal spine or a hook can still go through fabric that stops a slicing cut. The glove belongs on the hand that holds the fish, the knife hand stays where it is, and the usual rules of cutting away from yourself still apply. What follows are eight gloves whose listings state a fish, food or fillet use, plus a plain-language guide to the cut levels printed on them.

Quick picks

  • Wet grip with a rubber palm and fillet-specific design: KastKing Kut Safe
  • Highest stated cut level in a lightweight, food grade, two-pair pack: Schwer SlicePro A9
  • Maximum slice protection on the holding hand: Honeywell Stainless Steel Fillet Glove
  • Close fit for a fishing boat or dock: Fish Monkey Filet Gripper or Rock Fish FP3703
  • Budget-friendly general kitchen glove that also handles fish: NoCry Premium or Dowellife Level 5

KastKing Kut Safe Cut Resistant Fishing Gloves

This one is built around fish prep. The title lists HPPE and metal knit construction, a non-slip rubber palm and an easy-clean texture, and names filleting as an intended use. It is sold in sizes, so you pick between small, medium and large rather than a one-size liner. The rubber palm is the useful part for fish work: a slick catfish, bass or walleye gives a plain knit glove nothing to bite on, while a coated palm holds on with less squeezing.

The title says “ANSI Level 6”. The ANSI/ISEA 105 scale is written A1 through A9, so a bare “Level 6” does not map cleanly to it. Treat it as a marketing description and check the listing for the actual standard or test result. As a rough reading, a high mid-range cut rating is a reasonable fit for a fillet-holding hand. Confirm whether it is a single glove or a pair before ordering.

Schwer SlicePro ANSI A9 Cut Resistant Gloves, 2 Pairs

This is the highest ANSI level on the scale, in a food grade glove that comes as two pairs. The title also states non-PFAS and no glass fiber, which matters if you dislike the itch some fiberglass-blend gloves can cause. Fish fillet processing, oyster shucking, meat cutting and mandoline slicing are all named, so it works as an all-kitchen glove rather than a fishing-only one.

Two pairs is practical: wear one while the other dries after a long cleaning session. The question to check on the listing is the palm surface. A9 cut resistance does not say anything about wet grip, and a smooth knit can feel slippery on a slimy fish. Pair it with a disposable nitrile glove over the top if that is a problem. Sizes are sold separately, so choose carefully.

Honeywell Cut-Resistant Stainless Steel Fillet Glove (RWS-57046)

This is a traditional stainless steel mesh fillet glove, sold as a pack of one in size large. Metal mesh is the old-school answer to slicing cuts, and it is the approach butchers and oyster shuckers have used for decades. It protects well against a blade sliding across the back or palm of the holding hand, and it rinses clean under the tap.

The trade-offs are weight and feel. Mesh is heavier than fabric, it is stiffer when you are picking up small pin bones, and it offers less insulation against cold water. Because this is a single glove, it goes on the hand that holds the fish. The title does not say whether it fits left, right or both hands, so check the listing. A mesh glove can also trap fish slime and scales in the links, so rinse it right after use.

Fish Monkey Filet Gripper Glove

The title describes a cut-resistant, quick-dry, breathable glove with a “second skin” fit and a non-slip surface, for men and women. That puts it at the thin, close-fitting end of the range, which suits anyone who wants to keep feeling the fillet and still use a knife or pliers with the other hand. Quick-dry is handy on a boat where you rinse and reuse the glove all day.

The title does not state a cut level or standard, so there is no number to compare against the others. Thin gloves of this type are generally aimed at grip and light protection, not at stopping a hard slash from a freshly sharpened blade. Check the listing for a rating before trusting it near a very sharp knife, and check the sizing chart, since a second-skin fit only works if it actually fits.

Rock Fish FP3703 Filet Gripper Fishing Gloves

Sold under the Cordova brand, this is described as a cut-resistant filet gripper glove for food prep in both salt and fresh water, supplied as one pair in size large. The saltwater mention matters if you clean fish at the dock or on the beach, where salt and sand are hard on gear. A pair also means both hands can be covered when you hold and turn a large fish.

The title gives no cut level, so as with the Fish Monkey the rating is a question for the listing. The “gripper” wording points to a textured palm. If you do a lot of filleting for a crowd, a glove aimed at fishing and food prep is a more direct fit than a general work glove, but only the rated gloves above tell you how much protection you are actually getting.

NoCry Premium Cut Resistant Gloves, Food Grade

This is a general kitchen glove with a clear food-safe focus: the title states “100% food safe” and food grade, Level 5, for chefs, butchers, mandoline work and oyster shucking. Comfort and dexterity are the selling points in the title, which is helpful when you are working around pin bones and thin skin and need your fingers to move freely.

Fish is not named in the title, but filleting and oyster shucking involve the same kind of hand position. Level 5 here is a retail label, and the title does not say whether it follows EN 388 or ANSI/ISEA 105, so look for the standard on the listing. It is a reasonable budget-friendly choice for light fish work, with the caveat that a smooth fabric glove has less wet grip than a coated palm.

Dowellife Level 5 Cut Resistant Gloves, 2 Pairs (Medium)

The Dowellife listing names Level 5 protection, food grade, and uses that include oyster shucking and fish fillet processing. This version is sold as two pairs in medium, so there is a spare while the first pair dries. The brand also makes sizes from small to extra large and some stainless mesh and higher-level options, so look at the size and pack listed before ordering.

It is a sensible mid-range choice for a household that fillets a few times a month and also uses the gloves for mandoline slicing. As with other Level 5 gloves, check whether the number refers to the EN 388 coup test or an ANSI level, and do not assume the palm is textured; the title does not say. If you want a rubberized palm, the KastKing is a closer match.

Rapala Fillet Glove, Large

Rapala sells this as a cut-resistant protective glove for fish cleaning, with a secure non-slip fit and “left or right hand use”. That wording suggests an ambidextrous design for the hand that holds the fish. It comes from a brand known for fishing and fillet knives, so it pairs naturally with a fillet knife in a tackle bag.

The title does not state a cut level, material or whether the pack is one glove or a pair, so those are the checks to make on the listing. Treat it as a straightforward fishing-use glove and confirm the rating before using it with a very sharp blade. Because it is sold as a single size (large here), measure your hand against the chart before ordering.

Side-by-side comparison

Glove Key spec from the title Best for
KastKing Kut Safe “ANSI Level 6”, HPPE and metal knit, rubber palm Wet grip while filleting
Schwer SlicePro ANSI A9, food grade, 2 pairs Highest listed protection
Honeywell RWS-57046 Stainless steel mesh, pack of 1 Slice protection on the holding hand
Fish Monkey Filet Gripper Quick dry, second skin fit, rating: check listing Boat and dock use
Rock Fish FP3703 Filet gripper, salt and fresh water, one pair Dock and shore cleaning
NoCry Premium Level 5, food grade Budget-friendly kitchen use
Dowellife Level 5 Level 5, food grade, 2 pairs Occasional fish and general kitchen use
Rapala Fillet Glove Left or right hand, rating: check listing Simple fishing-bag glove

How to choose

Understand the cut levels

Two systems appear on labels, and they are not interchangeable. ANSI/ISEA 105 rates gloves from A1 to A9 using a test that measures the weight, in grams, needed for a blade to cut through the material. Roughly: A1 is 200-499 g, A2 is 500-749 g, A3 is 750-999 g, A4 is 1,000-1,499 g, A5 is 1,500-2,199 g, A6 is 2,200-2,999 g, A7 is 3,000-3,999 g, A8 is 4,000-4,999 g and A9 is 5,000 g and above. Higher means more resistance.

EN 388 is the European standard, and its code has several digits. One is the older coup test cut score, from 1 to 5, and in the 2016 version a separate letter from A to F comes from a second, more demanding blade test. A plain “Level 5” on a retail listing often means the highest number on the older coup scale, which is not the same as A5 or A9. When a title only says “Level 5”, look for the ANSI A rating or the EN 388 code in the listing images.

For fish cleaning, A4 is a workable floor, A5 to A7 is comfortable for regular use, and A8-A9 or steel mesh is for people who want a large safety margin. Puncture is rated separately and many cut-rated fabric gloves do poorly on it. If you handle spiny fish like some catfish, a puncture rating or a heavier glove matters more than a higher cut number.

Fit

Sizing is where most people go wrong. A loose glove bunches at the fingertips, shifts when you turn the fish, and gets caught under the blade. A glove that is too tight cuts circulation and tires the hand. Measure around the palm and use the brand size chart rather than guessing from a shirt size. For a close, flexible feel, a second-skin style glove works better. For maximum protection and less need to feel the fish, accept a slightly thicker glove.

Grip when wet

Fish slime defeats smooth fabric. Look for a coated or rubber palm, a crinkle or sandy finish, or at least a textured knit. Coatings like nitrile or rubber help, but a coated glove is less breathable, so your hand sweats on a warm day. Fabric gloves can be worn under a disposable nitrile glove for extra grip and easier cleanup. Hold the fish with a dry towel or paper towel against the glove when you need extra friction on slippery species.

Food-safe materials

If the glove will touch food you eat, look for the words “food grade” or “food safe” in the listing, and check whether the brand says what that is based on. Stainless steel mesh is a long-standing food-contact material, as are many HPPE fabrics. Some higher-level gloves use fiberglass blends, which can shed fibers; a few titles above state “no glass fiber”. A glove that has been used on bait or on a boat deck should not go anywhere near food prep until it has been washed.

One glove or a pair

A single glove goes on the hand that holds the fish, and that is the hand most exposed to a slipping blade. It is cheaper and simpler. A pair covers both hands, which helps when you hold a large fish steady while working a knife with a glove on the other hand as a backup, or when you want a spare while one pair dries. Multi-pair packs like the two-pair ones above make sense for households where more than one person cleans fish.

Use and care

  1. Wear the glove on the hand that holds the fish. Keep the knife hand free unless you are using a stabilizing technique.
  2. Cut away from the glove hand and keep the blade edge clear of your fingertips, even with the glove on.
  3. Keep the knife sharp. A dull blade needs more force and slips more readily, which is a common way for the blade to skid toward the hand. A knife sharpener is part of glove safety.
  4. Rinse the glove right after use. Fish proteins and oils are hard to remove once dry.
  5. Wash fabric gloves as the label directs, usually by hand or in a gentle machine cycle, and air dry them flat. Heat can damage some coatings. Steel mesh can be scrubbed with a brush and hot soapy water and left to dry completely before storing.
  6. Retire the glove if you see cuts in the fabric, frayed or thinning patches on the palm, or damaged mesh links. A worn glove no longer matches its rating.
  7. Use a stable surface. A fish cutting board that doesn’t slide does more for safety than any glove.

FAQ

Can I use a cut-resistant glove to hold a fish while I fillet it?

Yes, that is the intended use. Wear it on the non-knife hand to protect against slips of the blade. It is not a substitute for careful technique, and it does not stop punctures from the knife tip, spines or hooks.

Is an A9 glove always better than an A5?

Not automatically. A9 means higher cut resistance in the lab test, but the glove may be thicker, less sensitive and slicker when wet. For many home anglers, a well-fitting A5 with a good grip is easier to use safely than a stiff A9.

Are stainless steel mesh gloves worth it for fish?

They offer strong slice protection and are easy to rinse clean, which makes them popular for the holding hand. They are heavier and less sensitive than fabric, and the links can collect slime and scales, so they need a thorough rinse after use.

Can I wash cut-resistant gloves in the machine?

Many fabric models can be washed, but check the label or listing. Avoid hot dryers and bleach, which can weaken fibers and coatings. Mesh gloves are usually cleaned by hand and dried completely.

Choose the glove on fit and grip, check that the rating is stated in a standard you recognize, and wash it after each session. For related gear, see the guides to fillet knives and fish scalers.

T
The Fish Butcher Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Cut-Resistant Gloves for Fish CleaningCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.