Key takeaways
- 1 to 1.5 inches: Nail holes, small dings, window glazing and tight corners.
- 2 to 3 inches: The most useful general size for spackling and light scraping.
- 4 to 6 inches: Embedding drywall tape, filling larger holes and spreading first coats of joint compound. Bob Vila lists the DeWalt 6 inch stainless knife for this purpose.
- 8 inches and wider: Skim coats and wide feathering. Some sets include widths up to 8 inches, such as the set Kirk Painting ranks first for drywall repair and wallpaper stripping.
For most households, a flexible stainless steel putty knife around 2 inches wide such as the Red Devil 4206 or Warner full-flex is the right tool for spackle and filler, a stiffer 1.25 to 2 inch blade such as the Red Devil 4201 or the Husky 2 inch is the right tool for scraping, and a wide 6 inch blade such as the DeWalt is the one to buy if you are taping and skimming drywall. Most DIYers end up owning one flexible and one stiff knife, which is why this guide treats them as two jobs rather than one.
Our top picks
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
Putty Knives at a Glance
The specifications below are drawn from reviewer summaries by Bob Vila, Kirk Painting and All About Knife. Where a source gave no figure, none is listed.
| Knife | Width | Flex | Best for | Limits |
|---|---|---|---|---|
| Husky stainless putty knife | 2 in. | Stiffer | Paint scraping and general work | Less flexible than spreading blades |
| Red Devil 4206 Flex | 2 in. | Flexible | Spreading spackle and joint compound | Steel blade needs drying after use |
| Red Devil 4201 Stiff | 1.25 in. | Stiff | Heavy scraping of paint, grout and adhesive | Reviewer reports rust if left damp |
| Red Devil 4202 Flex | 1.25 in. | Flexible | Window glazing and small repairs | Narrow blade |
| Warner full-flex | 1.5 in. | Full flex (bends about 90 degrees) | Feathering spackle flush with walls | Must be dried right after washing |
| Warner stiff with hammer cap | 1.5 in. | Stiff | Scraping, with a cap for setting nails | Not for fine finishing |
| DeWalt stainless | 2 in. and 6 in. | Flexible, hollow ground | Professional daily use; wide blade for tape and first coats | Higher cost per knife |
| Hyde soft grip stainless | 1.5 in. | Flexible | Uneven surfaces and comfort | Not a heavy scraper |
| Red Devil plastic set | 1.5, 3 and 6 in. | Flexible plastic | Light patching on delicate surfaces | Can snap under pressure |
Flexible or Stiff: Choose by the Job
This is the main decision. A flexible blade bends under hand pressure, so it spreads a thin, even layer of spackle or compound and can follow gentle curves. A stiff blade does not give, so it transmits force to the edge and lifts paint, old glazing, caulk, wallpaper residue and dried adhesive.
Kirk Painting makes the same point in its guide: stiff blades excel at scraping dried paint and adhesive, while flexible blades create smooth finishes when spreading lightweight spackle. Its advice is that most DIYers benefit from owning both. Bob Vila’s guide gives the Husky 2 inch stainless knife its best overall pick for paint scraping and general-purpose work, with a comfortable rubber grip and good leverage, and lists the Red Devil 4206 2 inch flex knife for spreading spackle and joint compound.
A rule of thumb: if you are putting material on, choose flexible; if you are taking material off, choose stiff. A cheap compromise is a medium-flex blade, though reviewers generally find that a dedicated pair works better than one in-between knife.
Blade Material
Stainless steel
Stainless is the most recommended material for spreading because it resists the moisture in water-based fillers and compounds. Bob Vila’s guide notes that stainless flexes well and resists corrosion. DeWalt’s 2 inch knife, described by Kirk Painting as hollow ground and flexible with an alloy hammer end, is noted as resisting rust even when wet. The Hyde soft grip knife is described by All About Knife as having a stainless blade that resists rust and holds its edge.
Carbon or alloy steel
Carbon and alloy steels tend to hold a sharper working edge and are often cheaper. The trade-off is rust. Kirk Painting says the Red Devil 4201 stiff knife can develop rust within a day if it is left damp, and the Warner full-flex needs to be dried immediately after washing. If you clean knives promptly, this is a minor issue; if you tend to leave tools in a bucket, choose stainless.
Plastic
Plastic putty knives, like the Red Devil three-piece set, are cheap, will not scratch delicate surfaces such as vinyl, laminate or car trim, and are fine for light patching. Bob Vila points out that their limited flexibility can make it harder to lay down an even coat of spackle, and Kirk Painting says they can snap under heavy pressure.
Width: Match the Blade to the Repair
- 1 to 1.5 inches: Nail holes, small dings, window glazing and tight corners.
- 2 to 3 inches: The most useful general size for spackling and light scraping.
- 4 to 6 inches: Embedding drywall tape, filling larger holes and spreading first coats of joint compound. Bob Vila lists the DeWalt 6 inch stainless knife for this purpose.
- 8 inches and wider: Skim coats and wide feathering. Some sets include widths up to 8 inches, such as the set Kirk Painting ranks first for drywall repair and wallpaper stripping.
A narrow blade gives control but leaves ridges on wide patches, while a wide blade covers quickly but is harder to steer into corners.
Handles and Comfort
For long sessions, handle shape matters as much as the blade. Soft-grip handles such as Hyde’s and Warner’s reduce hand fatigue, and the Husky is praised for a rubber grip and leverage. Wooden handles are lighter and cheaper but can absorb moisture. A hammer cap on the end of the handle, as on certain Warner and DeWalt knives, lets you tap in a protruding nail head before you fill the hole. It is a useful feature, but not a replacement for a hammer if you have bigger jobs.
Safety and Care Notes
Kirk Painting warns that some budget metal sets skip the final polishing step, leaving side edges sharp enough to cut skin. Run a finger lightly along the sides before first use and file or sand any burrs. Always push the blade away from your body and keep your off hand clear of the path of the blade when scraping. Wear eye protection when scraping old paint, and if the paint could date from before the late 1970s, follow lead-safe practices and local rules before disturbing it.
Clean putty knives right after use. Dried compound is easier to remove while soft. Wipe stainless knives dry, and wipe carbon steel knives dry and apply a drop of light oil if you will store them for a while. Do not use a flexible blade as a pry bar; it will bend permanently.
Budget, Mid-Range and Premium Tiers
| Tier | Examples | What you get | What you give up |
|---|---|---|---|
| Budget | Red Devil plastic set, Red Devil 4201, 4202, 4206 | Basic blades that do the job | Rust care, plastic can snap, handles are plain |
| Mid-range | Husky 2 in., Warner full-flex and stiff, Hyde soft grip | Better handles, stainless options | Specialized blades need to be bought separately |
| Premium | DeWalt stainless knives, multi-piece stainless sets | Hollow ground flex, durability, hammer ends | Higher outlay for a simple tool |
Pick X If… Decision Table
| Pick this | If you want | Trade-off |
|---|---|---|
| Husky 2 in. stainless | One knife for scraping and general use | Less flexible for feathering |
| Red Devil 4206 flex | Smooth spackle and compound work | Dry after use |
| Red Devil 4201 stiff | A low-cost heavy scraper | Rusts if left damp |
| Warner full-flex | Feathering patches flush to the wall | Immediate drying needed |
| DeWalt 6 in. stainless | Drywall tape and wide coats | Too big for small repairs |
| Plastic set | Scratch-free work on delicate surfaces | Weak under pressure |
Alternatives
- Combination painter’s tool: Bob Vila lists the Purdy surface-prep tool, which scrapes and cleans. It is handy for painters but is not a spreading knife.
- Hyde 2-in-1 glazing tool: All About Knife picks it as a dual-function tool for window glazing work.
- Drywall taping knives and hawks: For whole-wall skimming, wider taping knives are easier than putty knives.
Frequently Asked Questions
What is the difference between a putty knife and a scraper?
A putty knife is typically narrower and used for applying filler, while a scraper has a thicker, stiffer blade for removing material. There is overlap, since stiff putty knives are often used as light scrapers. A single stiff 2 inch knife can cover both jobs for small projects.
What size putty knife should I buy first?
A 2 inch flexible stainless knife is the most useful starting point because it handles nail holes, dings and small cracks. Add a stiff 1.25 to 2 inch blade for scraping, and a 6 inch knife only if you plan drywall work.
Why does my putty knife leave lines in the spackle?
Ridges usually come from a nick or burr on the blade edge, or from pressing too hard with a stiff blade. File off burrs, use a flexible blade, and pull the knife across at a shallow angle. A final light pass after the spackle dries, with sanding, usually removes any remaining marks.
How do I keep a putty knife from rusting?
Choose stainless steel if you do not like maintenance. For carbon steel blades, wash them straight after use, dry them completely, and store them dry. Reviewers note that damp storage is what causes the fastest rust.
Can I use a putty knife to remove old caulk or paint?
Yes, a stiff knife is suitable for scraping dried paint and caulk, as Kirk Painting and others describe. Keep the edge flat, protect the surface underneath, and be careful on soft wood where the corner can gouge. If the paint might contain lead, use lead-safe methods and local guidance.
Is a plastic putty knife good enough?
For light patching on surfaces that scratch easily, yes. For smooth, even coats and for any scraping, a steel blade performs better. Plastic works as a secondary tool rather than the only one.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!